INVERTER RESISTIVE HEATER DHC 6510R

INVERTOR DHC 6510R is designed primarily for controlled annealing of materials after welding to reduce tension and reduce hydrogen content and for preheating before welding up to temperature of 1050 °C. Full description

INVERTOR DHC 6510R is designed primarily for controlled annealing of materials after welding to reduce tension and reduce hydrogen content and for preheating before welding up to temperature of 1050 °C. It has a temperature regulator and recording for higher-level programming intended particularly for weld annealing. It also allows a multi-zone mode, programme linking and copying, setting multiple regulator values, and more. The recording time is up to 1400 hours.

  • Energy and petrochemical industry – weld annealing andpreheating for pipelines, heat exchangers, boilers, steelvessels, flanges – wherever welds have to be annealed.
  • Frame structure construction, shipbuilding – welding of long and short joints – preheating, annealing.
  • Extractive industries – preheating of parts before welding.
  • Industrial manufacturing – preheating of parts to specifictemperature.
  • Repairs, renovations, weldons – economic and technologycorrect preheating of parts, mobility allows inverter use in the field.
  • Automotive industry – entire chassis heating before welding in production.
  • Wide range of accessories.
Parameter Value
Order no. 04-004
Power supply requirements 3x 400 V +/- 15 %
Frequency (Hz) 50/60 Hz
Consumption 23 A ±15 %
Ingress Protection Code IP21
Temperature sensor K-type thermocouple, galvanically isolated
Inlet protection 25 A
Output voltage/current 0-60 V / 180 A, 65 V / 160 A infinitely adjustable, CV/CC
Electrical load resistive heating elements 24-60 V (type 30 / 42 / 60 V)
Measuring/control range -25° to 1 200 °C
Alarm 2 configurable (deviation SV/PV, reaching the temperature etc.)
Fault detection thermocouple disconnection, overload, overheating, output short circuit, etc.
Multizone control yes, master/slave type, max. 9 units
Operating Temperatures / Coverage -20° to 40°C (with power limitation up to 50 °C)
Regulator digital, user adjustable
Recorder up to 1,400 hours of recording, also stores error conditions
Data download via 485/USB to PC, export to Excel
Dimension 170x370x405 mm
Height 17 kg
  • Mobility - weight 17 kg.
  • Even heating.
  • Power 10,8 kW.
  • Can connect up to 4 elements.
  • Flexibility of use – power supply 3x 400 V 32 A.
  • Intuitive and easy controls – easy to operate.
  • Multi-zone mode – can connect 9 machines with 1 application – heating control in up to zones with a total power output of 95 kW. Versatile uses – even heating.
  • 3 in 1 – inverter + temperature regulator + recorder.

Controller and recorder DHC 6510R – easy programming ofthe controller.

Fast download of data from recording machine and easy work with measured data. Temperature can be controlled from any of the 20 user-adjustable temperature profiles / programs with up to 180 segments or directly to a user-set temperature, which can be changed any time as needed. You can set heating or cooling rate, time over which the temperature should be maintained as well as target temperature, independently in each profile segment as well as in the manual mode of temperature control.

Of course, heating power can be controlled directly. The controller has a user lock in menu for locking setting sof PID values. Digital recorder of the course of heating with the capacity of 64 hours of recording is also integrated. Data can be transferred to a PC where it can be further processed, for example for logging the course of heating or its control. Thereby, maximum complexity and simplicity of use of this device was achieved, its control can be handled by anyone.

We also recommend buying these products

Accessories

INSULATING FABRIC TYGASIL

TYGASIL insulating fabric with a special treatment, that allows it to retain its properties up to a temperature of 950 °C.

EXTENDING DOUBLE CABLES

For the extension of standard splitting cables.

CERAMIC ELEMENTS 30 V

Flexible ceramic elements 30 V are made of high quality ceramic parts, which are entangled with resistance wire NiCr 80/20 19.

CERAMIC ELEMENTS 60 V

Flexible ceramic elements 60 V are made of high quality ceramic parts, which are entangled with resistance wire NiCr 80/20 19.

COMPENSATION CABLES

Compensation cable for connection of the type ''K'' thermocouple wire.

MAGNET FOR THERMOCOUPLE

Magnet for thermocouple wire.

MAGNETS FOR CERAMIC ELEMENTS

Limpet magnets for ceramic elements.

SPARE CONNECTORS FOR SPLITTING CABLES

Spare connectors for splitting and extending double cables.

RESISTANCE WIRE

Resistance wire for repare of ceramic elements.

USB CONNECTION CABLE

USB connection cable to connect the invertor to the PC for downloading measured data.

SPLITTING CABLES

Splitting cables for connection of ceramic elements to invertor heater.

THERMOCOUPLE WELDER TW163V

TW163 is a capacitive rechargeable welding unit used to hold a thermocouple. This unit works with a mains connection for charging.

THERMOCOUPLE CONNECTOR

Thermocouple connector for compensation cables.

CUSTOM CERAMIC ELEMENTS

Ceramic elements made on request according to the specific application.

STEEL TAPE TIGHTENING PLIERS

Solid hand pliers of the BAND-IT all-metal construction for easy assembly of clamping belts.

RESISTANCE HEATER TROLLEYS

A trolley for resistance heaters for easy handling.

STEEL TAPE

Steel binding tape, 16 x 0.5 mm, metallic shiny, without surface treatment.

ROPE HEATER

Rope heater is designed to heat pipes, bends and ''T'' shaped profiles.

ONE LINE CERAMIC ELEMENT

One line ceramic element is designed to heat pipes, bends and ''T'' profiles.

MAGNETIC CERAMIC ELEMENTS

Magnetic elements are designed for preheating of circumferential and longitudinal welds. The elements are made including insulation fabric for easier handling.

Need any help? Send us your message and we will get back to you.